Loading...
 

Productos

C.I. INTERNATIONAL FUELS es una empresa dedicada al estudio de las necesidades del mercado en el área de los combustibles y lubricantes ofreciendo una extensa gama de productos para cubrir las necesidades de cualquier empresa nacional e internacional.
Fichas Técnicas.
CARACTERÍSTICAS IFOS
ParameterUnitLimitRMA 30RMB 30RMD 80RME 180RMF 180Test Method
Density at 15 CKg/m3Max.960.0975.0980.0991.0991.0ISO 12185/3675
Viscosity at 50 Cmm2/sMax.30.030.080.0180.0180.0ISO 3104
Water% v/vMax.0.50.50.50.50.5ISO 3733
Micro Carbon Reside% (m/m)Max.1010141520ISO 10370
Sulphur% (m/m)Max.3.53.54.04.54.5ISO 14586/8754
Total sediment potential% (m/m)Max.0.100.100.100.100.10ISO 10307-2
Ash% (m/m)Max.0.100.100.100.100.15ISO 6245
Vanadiummg/kgMax.150150350200500ISO14597
Aluminium Plus Siliconmg/kgMax.8080808080ISO 10478
Flash pointCMin.6060606060ISO 2719
Pour point, SummerCMax.624303030ISO 3016
Pour point, WinterCMax.024303030ISO 3016
The fuel shall be free of ULO. A fuel shall be considerec to be free of ULO if one or more of the elements Zinc, Phosophorous and Calcium are below or at the specified limits. All three elements must exceed the same limits before a fuel shall be deemed to contain ULO.
Zincmg/kg--15---IP 501
Phosphorousmg/kg--15---IP 501
Calciummg/kg--30---IP 501

 

ParameterUnitLimitRMG 380RMH 380RMK 380RMH 700RMK 700Test Method
Density at 15 CKg/m3Max.991.0991.01010.0991.01010.0ISO 12185/3675
Viscosity at 50 Cmm2/sMax.380.0380.0380.0700.0700.0ISO 3104
Water% v/vMax.0.50.50.50.50.5ISO 3733
Micro Carbon Reside% (m/m)Max.1822222222ISO 10370
Sulphur% (m/m)Max.4.54.54.54.54.5ISO 14586/8754
Total sediment potential% (m/m)Max.0.100.100.100.100.10ISO 10307-2
Ash% (m/m)Max.0.150.150.150.150.15ISO 6245
Vanadiummg/kgMax.300600600600600ISO14597
Aluminium Plus Siliconmg/kgMax.8080808080ISO 10478
Flash pointCMin.6060606060ISO 2719
Pour point, SummerCMax.3030303030ISO 3016
Pour point, WinterCMax.3030303030ISO 3016
The fuel shall be free of ULO. A fuel shall be considerec to be free of ULO if one or more of the elements Zinc, Phosophorous and Calcium are below or at the specified limits. All three elements must exceed the same limits before a fuel shall be deemed to contain ULO.
Zincmg/kg--15---IP 501
Phosphorousmg/kg--15---IP 501
Calciummg/kg--30---IP 501
CARACTERÍSTICAS MGO
CharacteristicsUnitLimitCategory ISO - F -Test Method
DMXDMADMZDMB
Kinematic Viscosity at 40 Cmm2/smax5.5006.0006.00011.00ISO 3104
min1.4002.0003.0002.000
Density at 15 Ckg/m3max-890.0890.0900.0ISO 3675 or ISO 12185
Cetane Index-min45404035ISO 4264
Sulfur (b)mass %max1.001.501.502.00ISO 8754 or ISO 14596
Flash point°Cmin43606060ISO 2719
Hydrogen Sulfidemg/kgmax2.002.002.002.00IP 570
Acid numbermg KOH/gmax0.50.50.50.5ASTM D664
Total sediments by hot filtrationmass%max---0.10ISO 10307-1
Oxidation Stabilityg/m3max25252525ISO 12205
Carbon residue - micro method
on the 10% vacuum destilation residue
mass%max0.300.300.30-ISO 10370
Carbon residue - micro methodmass%max---0.30ISO 10370
Cloud point°Cmax-16---ISO 3015
Pour point(upper)Winter Quality°Cmax-6-6-60ISO 3016
Summer Quality°Cmax0006
Appearance--Clear and brighte,f,g-
Watervolume %max---0.30ISO 3733
Ashmass %max0.0100.0100.0100.010ISO 6245
Lubricity, corrected wear scar
diameter(wsd 1.4) at 60°C
μmmax520520520520ISO 12156-1
  FICHA TÉCNICA
CARACTERÍSTICAFUEL OIL O COMBUSTOLEO Nº6
Gravedad API a 60ºF(15.6ºC)4.8
Gravedad Especifica1.03
60/60ºF(15.6/15.6ºC1
Punto de inflamación ºC/ºF85/185
Viscosidad SSF a 122ºF (50ºC)230
Viscosidad SSU a 100ºF6100
Viscosidad CST a 100ºF1315
Azufre.% masa1.7
Vanadio, PPM290
Cenizas, % mas0.085
Residuos de Carbón,% masa14.9
Poder calorífico,BTU/LB 182518250

 

 

 All works